The Best Base for a Permeable Paver Parking Pad or Driveway in Toronto

Finished parking pad in Toronto Beaches built with semi-permeable pavers and a permeable base, designed for optimal drainage and sustainability.

Having been in the landscaping and interlocking brick installation business for over 40 years, I've witnessed the evolution of materials and techniques used for parking pads and driveways. Over time, we've seen what works and what doesn’t when it comes to creating durable, long-lasting surfaces that also support environmental sustainability through permeability.

Through years of trial and error, we have embraced the recommended bases for semi-permeable pavers. These bases have significantly outperformed traditional methods, leading us to switch to this system for all of our paver installations including patios and walkways.

The Problems with Traditional Bases

When I first started in this industry, the common base installation involved using a sub-base of Granular A and screeding with concrete sand. Although compacting this material to 98% Proctor density was the recommendation, it rarely worked as intended. The problem? Most landscapers didn’t have access to the heavy tamping equipment required to achieve that level of compaction. Even those who did often underestimated the amount of time and effort needed to reach a 98% compaction rate. Over time, this resulted in tire rutting and structural degradation—issues that became apparent only a few years after installation.

Tire ruts in older parking pad highlighting inferior base being used

Tire ruts in older parking pad are the result of the use of inferior bases and can be avoided.

DriveGrid spreads the load of a car under a parking pad

To avoid tire ruts DriveGrid needs to be used on top of the native ground before the gravel is laid.

Our Solution: A Modern, Permeable Approach

For the past six years, we've adopted a more reliable, industry-backed system. This involves excavating 12 inches and installing a DriveGrid layer followed by 8 inches of 3/4" clear gravel, also known as ASTM No. 57. This crushed, angular, open-graded base material has an exceptional infiltration rate of over 500 inches (12,700 mm) per hour.

On top of this base, we lay a screeding layer of High-Performance Bedding Gravel (HPB), also referred to as 1/4" chip stone. Like the clear gravel beneath it, HPB is crushed, angular, and has a high void space that allows for rapid water infiltration, again exceeding 500 inches per hour. This structure not only promotes permeability but ensures long-term stability, even under heavy use.

Permeable pavers above clay soil require a underdrain to take water to a soak-away pit

When the sub-soil is clay water needs to be directed to a soak-away pit under an adjacent garden or lawn. 

The Importance of DriveGrid Geogrid

At the heart of this system is DriveGrid Geogrid, an innovative material specifically designed to stabilize the base of trafficked surfaces. Its multi-directional triangular geometry improves in-plan stiffness, reducing the amount of gravel required to achieve the same load-bearing capacity. DriveGrid Geogrid's advanced design eliminates the need for a thicker sub-base without compromising on performance.

Addressing Slow-Draining Soil

When we encounter areas with soil that drains very slowly, we take extra measures by installing a drainage pipe, directing the water to a soak-away pit under an adjacent garden or lawn. This ensures that any excess water can drain away efficiently, preventing pooling and maintaining the integrity of the parking pad.

Switching to a permeable paver base not only offers a sustainable solution but also ensures durability. These installations can handle the stresses of daily use without sacrificing aesthetic appeal or structural integrity. With Toronto’s weather extremes, having a well-designed, permeable base is essential for long-lasting driveways and parking pads, and even patios and walkways.


Since adopting this method, we’ve entirely eliminated tire rutting in our parking pads, providing our clients with a superior, more resilient surface.


Ready to Build the Perfect Parking Pad?

Transform your driveway or parking pad with Green Apple Landscaping's proven, sustainable permeable paver systems. With over 40 years of experience and a commitment to durability and environmental care, we’ll create a surface that stands up to Toronto’s toughest conditions.

💧 Maximize drainage, minimize maintenance.
🚗 Say goodbye to tire ruts with our superior DriveGrid system.
🌱 Enhance your property while protecting the environment.

Contact us today for a consultation — let’s build something exceptional!

Bonnie Summerfeldt

A former print magazine art director who helps other savvy professionals get more credibility and confidence online with personal branding and Squarespace websites.

https://bsdesign.ca/
Previous
Previous

City Parking Permits in Toronto: Is It Time to Rethink Your Parking Strategy?

Next
Next

Toronto Front Yard Parking Loophole: Myth or Reality?